Latest RC2 Update - Zero Satellites after update - Fix

[xrubio]

Controller: RC2
Drone: Min 5 Pro

I experienced a zero sattellite after performing the latest update earlier this morning. I attempted the following in an attempt to fix it w/o any success:

* Reboot controller
* Powered on/off drone
* Reset/Erase Controller
* Got DJI support and they recommended to refresh both controller and drone firmware using DJI Assistant 2
* Removed/reseated drone battery several times
* Disable/Enable Location toggle switches on controller GUI - Only the one's that the controller allowed.
* Allowed the drone to cool down and attempted the above except for Reset/Erase and Refreshing firmware

After all this, about an hour and a half, you will not believe what resolved this...........

I moved the velocity toggle switch on the controller from N to S. Whatever funk it was stuck on, got out of it and suddenly I got the Controlled AirSpace Pop-up and it started picking up sattellites. DJI support will be notifying their engineers about this.

So keep this in mind when your drone starts acting like this.

What a headache!

 

[MavSol101]

Bug

 

[DISC]

Excuse my ignorance but what’s the Velocity Toggle Switch?

 

[BossBob]

Cine/normal/sport