legs stowed, propeller strap on, Is it safe to power up ?

[mangurian]

It's a mini 2.

I would like to communicate with ir w/o having to get it in deployable condition.

Thanks,

 

[MA2 317]

You might get a motor error if the props are restricted with a strap.

I assume the Mini 2 twitches the prop a bit like the other Mavics.

You might be okay if you removed the props.

 

[Yorkshire_Pud]

The motors and gimbal SHOULD NOT be restrained during boot.

 

[Prop Wash]

I agree I wouldn't. During power on, the camera moves, and the motors pulse. Better safe than sorry. IMO

 

[dirkclod]

I have on occasion started mine but is unfolded without props or gimbal cover on sitting on my desk.

 

[rawman001]

Hope it doesn't cause too much damage. I've accidentally powered mine up multiple times when trying to install the strap I got for it. The props actually actuate the power button when I'm putting the strap on. I like the way it holds everything in place but I think I'm going to ditch it if it keeps happening.

 

[Michael Ainsworth]

15 secs to unfold, all it takes for peace of mind.
Or if you normally take props off to store then 5 secs to detach gimbal guard.

 

[cc_jim]

Evidently it doesn't harm the mini 2 to start it with arms folded and gimbal cover off. How else would you run the IMU calibration?

 

[EyesWideShut]

Evidently it doesn't harm the mini 2 to start it with arms folded and gimbal cover off. How else would you run the IMU calibration?

That's right. Just watch for overheating. Running a fan by the heat louvers will help keep it cool if sitting for more than a few minutes.

 

[dirkclod]

Evidently it doesn't harm the mini 2 to start it with arms folded and gimbal cover off. How else would you run the IMU calibration?

Didn’t read the title of the thread. Of course that’s fine but don't
leave the gimbal cover on while doing the calibration.