Litchi Hub to DJI RC2 Mini 5 Pro Waypoint Issue

[tinpusher]

I'm using Litchi Hub to create a waypoint route then export it as KMZ. The KMZ is uploaded to DJI RC2 and I see top photo when I first look at newly added route. Unfortunately within minutes it turns into bottom photo on its own. Any ideas would be much appreciated. Thanks

 

[DJ Wes]

This is normal. It occurs when a straight-line mission is loaded into DJI Fly. DJI Fly can only create a curved turn mission. A straight-line mission can be externally created, loaded, and executed with DJI Fly. It just looks wonky as you have found. It will execute properly.

 

[tinpusher]

Thanks. I was wondering if that was the case as I saw duration and distance did not change. I'll try it out tomorrow.

 

[camposbrito]

Thanks. I was wondering if that was the case as I saw duration and distance did not change. I'll try it out tomorrow.

Pelo que vi no Litchi Hub, só tem a opção de exportar linha curvas.
Quando essa funcionalidade estiver presente, vai ser top.

This is normal. It occurs when a straight-line mission is loaded into DJI Fly. DJI Fly can only create a curved turn mission. A straight-line mission can be externally created, loaded, and executed with DJI Fly. It just looks wonky as you have found. It will execute properly.

 

[DJ Wes]

This is because you have not selected a drone model for the mission. Select a newer model (Mini 4 Pro, Air 3, Mavic 4) and you will have the "Smooth Curves" option available to choose and can export a KMZ file.