Get more from your Mavic
The largest Mavic community in the world
Join Us Now

MA1 help

FpvnWV

New Member
Joined
Jun 30, 2020
Messages
2
Reaction score
0
Age
42
Location
25309
Problem?error code 200

Was unit in a crash?yes

What have you tried so far?fact reset, replug cables

What device are you using ( iphone , ipad, Samsung , etc)?lg stylo5

What firmware are you running ( aircraft, remote controller)?latest MA 1

What Go app version are you using?go 4

Any modification?
(if so what)none

Did you change anything or install any apps? (if so what)none

Do you have a video or pictures of the problem? My question is this.... If you break an arm in a crash and order a new one, does the new arm HAVE to be soldered to the board or can you connect to the still remaining and undamaged wires? Just talking about the 3 motor and 3 lights wires.
 

Dakarenduro

Well-Known Member
Joined
Jun 12, 2019
Messages
659
Reaction score
535
Location
Dakar, Senegal
can't help much, but i believe if you buy a new arm you will need to solder. you wouldnt want to risk doing some sort of splice to old wires and havign that fail and cause another crash.
 

Detritalgeo

Well-Known Member
Joined
May 2, 2019
Messages
211
Reaction score
79
Location
Vancouver, Canada
To be honest it would be more frustrating to splice the wires together than to simply de-solder the old and solder on the new. Just use a little bit of flux and hopefully you have a narrow-tip for the soldering iron.
 
  • Like
Reactions: FpvnWV

FpvnWV

New Member
Joined
Jun 30, 2020
Messages
2
Reaction score
0
Age
42
Location
25309
Much appreciated. After getting into it though, can see that some of the thin gimbal wires have also been broken. So time for more parts!
 
All E RC Mavic Drones

New Threads

Forum statistics

Threads
88,504
Messages
1,020,359
Members
116,830
Latest member
bambi