Mavic 2 frame squeaking ?

[cyang1]

Hello everyone. I got my mavic 2 zoom yesterday and noticed that when I hold it the way like shown in the picture, the plastic part around my thumb squeaks (on both sides) . Can it be the QC issue, or this happens to everyone else ?

Feels like the build quality isn’t as good as my mavic air.

Any input is appreciated, thanks

 

[TineT]

Checked mine (M2Z also) and while it's not exactly squeaking it does give way when I squeeze it with a slight rubbing sensation. I suppose it has to do with how the non-structural panels are held to the frame.

 

[cyang1]

Thank you TineT for making an effort to check. Mine is pretty loud so I think I will send it back to have them check it . Cheers

 

[Phantomrain.org]

Hello everyone. I got my mavic 2 zoom yesterday and noticed that when I hold it the way like shown in the picture, the plastic part around my thumb squeaks (on both sides) . Can it be the QC issue, or this happens to everyone else ?

Feels like the build quality isn’t as good as my mavic air.

Any input is appreciated, thanks

Before you do that I would check out the rest of the drone as everything else might be perfect which is more important than a sqeeze sound. You can always fall back on the squeak but if there is something else wrong I would go with that.

Phantomrain.org
Cutting Edge Gear for your Mavic
Coal

 

[cyang1]

Before you do that I would check out the rest of the drone as everything else might be perfect which is more important than a sqeeze sound. You can always fall back on the squeak but if there is something else wrong I would go with that.

Phantomrain.org
Cutting Edge Gear for your Mavic
Coal

I totally agree with you and thanks for the advice ?

 

[Mike4884]

If you don't see any cracks I think you're okay buddy no need to send your drone back to dji....and possibly get a refurbished drone back because you will not get that one back for sure and then on top of that be out a few weeks of flying.

 

[Thomas B]

If you don't see any cracks I think you're okay buddy no need to send your drone back to dji....and possibly get a refurbished drone back because you will not get that one back for sure and then on top of that be out a few weeks of flying.

Nothing wrong with a refurb. Had the experience myself.

 

[DanMan32]

Still, sometimes DJI repair finds things that may not be actually wrong. If they latch onto something, it will be tough to convince them otherwise.

 

[Mike4884]

Nothing wrong with a refurb. Had the experience myself.

I didnt say anything was wrong with refurb. just telling what would go down because he sure as heck wont get og aircraft back.

 

[cyang1]

Hi guys, The DJI dealer where I got it from did offer to send it back so they can have a look at. Apparently they just tighten up some screws and everything is tight like it should now. No more squeaky or rubbing sounds. Who knows, I should have thought of that, or I could of done it myself lol.

Maybe it just a bad QC off factory line, I wish I cloud up load a video to show how bad it was.

As some of you guys mentioned, I don’t like getting a refurbished back either Personally , so I did make sure I got the same one back!

Thanks guys, great community ?