Mavic 2 Pro diagnostic software

[anastasis19]

Hello all! Not sure if this is the right place for this thread, correct me if I'm wrong.

I've got a Mavic 2 Pro, which sustained minor water damage. Aircraft powers up and been recognized by Assistant, but gimbal seems dead and no LEDs on arms, light on (seems to be problem whith ribbon from main board to ESC). Is there some kind of PC diagnostic software (even unofficial) that can use to check aircraft and individual boards (like main, ESC, GPS, IMU, gimbal etc) or the only way is to link it to a controller and see any error messages from there? RC is totally toasted so then need to buy another one.

Thanks in advance!

 

[Cafguy]

the only way is to link it to a controller and see any error messages from there?

Yep thats pretty much it! You can get error Lists from time to time online. Most errors mean the same thing Whatever Drone you have (mostly) so if you find an different drones list it will most likely be the same for yours.

 

[Starz]

Only DJI has what you describe. Water damage is usually not a good outcome. If it has the capacity to link to a controller, it then may show some form of error code(s).
RC has water damage also?