Mavic 2 Pro - Litchi/Android Samsung S9 & SC
Hello, never thought i would be posting this on here, I am ultra careful when planning waypoint missions, I always make sure they are within RC range for unexpected events like this, anyway, from my location here near Stockport, from the back top room of the house I have a great path as it rises up slowly towards Hyde/Werneth, I plotted a mission & initiated the 250ft AGL using the online data option as I have done countless times, the mission flew flawlessly, made the end point great signal back, full video feed, then as the craft turned around, it went towards the next return point on the same path home (all in one straight line) the craft froze I still had camera control etc, but if flat out refused to move forward or backwards, nothing was in the way, I had obstacle avoidance turned off due to low sun etc, but nothing would work, hitting RTH initiated but the craft still would not move, video feed showed I could still move the camera gimble, I tried raising the altitude still no movement, dropped altitude then I lost connection, big mistake, I kicked myself for that, anyway smart RTH was not on as I launched on a full 100% battery, I was anticipating a landing return of 40% at least, I got in the car & drove to where I think it could have been, 1 hour of searching the fields, no joy, I'm well gutted, after flying tons of local missions without a single hitch this has never happened before, I@m going to upload the logs & pray someone can pinpoint the last known position to at least try one more time to locate it, thanks guys. I was using Litchi with Android S9, even quickly tried swapping to my smart controller which are both binded to the Mavic 2 Pro just incase it was that but still no joy.
I've attatched the zipped flightlog & mission files, thanks for any help guys, gutted here.
Hello, never thought i would be posting this on here, I am ultra careful when planning waypoint missions, I always make sure they are within RC range for unexpected events like this, anyway, from my location here near Stockport, from the back top room of the house I have a great path as it rises up slowly towards Hyde/Werneth, I plotted a mission & initiated the 250ft AGL using the online data option as I have done countless times, the mission flew flawlessly, made the end point great signal back, full video feed, then as the craft turned around, it went towards the next return point on the same path home (all in one straight line) the craft froze I still had camera control etc, but if flat out refused to move forward or backwards, nothing was in the way, I had obstacle avoidance turned off due to low sun etc, but nothing would work, hitting RTH initiated but the craft still would not move, video feed showed I could still move the camera gimble, I tried raising the altitude still no movement, dropped altitude then I lost connection, big mistake, I kicked myself for that, anyway smart RTH was not on as I launched on a full 100% battery, I was anticipating a landing return of 40% at least, I got in the car & drove to where I think it could have been, 1 hour of searching the fields, no joy, I'm well gutted, after flying tons of local missions without a single hitch this has never happened before, I@m going to upload the logs & pray someone can pinpoint the last known position to at least try one more time to locate it, thanks guys. I was using Litchi with Android S9, even quickly tried swapping to my smart controller which are both binded to the Mavic 2 Pro just incase it was that but still no joy.
I've attatched the zipped flightlog & mission files, thanks for any help guys, gutted here.