Mavic 2 Pro Remote Controller disassembly

[waynequilliam]

Wonderful to be here, can anyone share a link of how I can disassemble my Mavic Pro 2 Remote to repair the charging usb port

 

[dirkclod]

Welcome to the forum.
Maybe this will help .Havn't looked at it just did a search and there it was.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[dirkclod]

I use these and have not had that issue NetDot 3 Pack Upgraded 1m/3.3ft Nylon Bradied USB2.0 Fast Charging Magnetic Micro USB Cable with LED Indicator Compatible with Android Device (3.3FT / 3 Pack Silver)
If it seems to be to much for you to do it I suggest you use these guys.
They are venders here.www.djidroneservice.com

Edit : I see where you are now so they might not be an option. Good luck.

 

[THE CYBORG]

I also use magnetic cables on my controllers, I leave the little plug part in permanently & use the large USB port to connect my tablet.

 

[dirkclod]

I also use magnetic cables on my controllers, I leave the little plug part in permanently & use the large USB port to connect my tablet.

Me also since the thread way back on them. Love em.
Edit : I leave them in just to charge my controller .

 

[Bill combs]

Welcome to the forum.
Maybe this will help .Havn't looked at it just did a search and there it was.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

one part of drone flying i enjoy is working on the drone,ive had every level of dji drones from fc-40 to the phantom 4p2.0 and mavic pro to platinum to mavic 2pro and found working on them to be very easy,i purchased a mpp brandd new from a guy who purchased it from best buy went outside and flew it into the wall of the best buy he bought it from and i replaced the gimbal and had a great drone for $500

 

[dirkclod]

one part of drone flying i enjoy is working on the drone,ive had every level of dji drones from fc-40 to the phantom 4p2.0 and mavic pro to platinum to mavic 2pro and found working on them to be very easy,i purchased a mpp brandd new from a guy who purchased it from best buy went outside and flew it into the wall of the best buy he bought it from and i replaced the gimbal and had a great drone for $500

I worked on all my Phantoms and started with a FC40 also but this one I'm not going in.
Hand's not as steady as they were now or eyes.
The OP hasn't been back since he posted the thread but do wish him luck.