Mavic 2 Zoom gimbal issue??

[GoGo22]

Hi, my friend bought a Mavic 2 Zoom (used one) and he asks if this is a normal behavior of the gimbal when doing a face down/up:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

As you can see in this short video it seems its drifting or correcting it self??
İs this normal??

Note: an gimbal and imu calibration are already done.

 

[Latawiec]

In my opinion this is normal. The gimbal is leveling itself after the fast vertical move. I would suggest to move the gimbal from the very bottom position to the top in much slower speed and see if the "floating" is still there.

 

[GoGo22]

In my opinion this is normal. The gimbal is leveling itself after the fast vertical move. I would suggest to move the gimbal from the very bottom position to the top in much slower speed and see if the "floating" is still there.

Hmm will ask him to test it with a much slower speed, but i would like to know if another mavic 2 zoom owner could confirm or deny that this normal behaviour of the gimbal.

Thanks for your reply @Latawiec

 

[GoGo22]

Well after letting the gimbal replace with a new one i found out that it wasnt normal. The new gimbal is 100% solid. İ dont have the same drifting when doing a face down/up. So failure of the gimbal unit.

İf some one faces the same issue conclusion is to swap the gimbal.