Mavic 3T and RTK

[fotonews]

Hello, I have been trying to connect the rtk module to my mavic 3t unsuccessfully. I have tried several combinations of starting up controller and drone and nothing. It always shows disconnected regardless of how strong internet, gps signal is. See attachment please. Any ideas anybody out there?

 

[Dave Pitman]

That box does not tell you if the module is attached. It tells you that you are receiving RTK corrections. In the Pilot 2 app, tap the 3 dots on the top/right. If you see the satellite icon in the list of functions, the drone is recognizing the RTK module. You tap on that icon to set up your NTRIP connection.

 

[mneeze]

What Dave Pitman said.
Also, after you setup a working NTRIP connection, you generally need to be outside in a clear(ish) area for the RTK to register as Connected: Fix. If you are inside, RTK can't connect properly and will just show as off/not connected.