Mavic Air 2/2S/Mini 2/Mini3 gimbal replacement

[b1xn00d]

Glad it's of use! I bought a new gimbal base (pitch + yaw arm: https://m.aliexpress.us/item/3256805292301576.html) on aliexpress for like $40 and put it in, so everything between the rubber plugs and the bracket attaching to the camera case (roll arm?) was replaced, along with both cables. You also need a set of covers ($20, https://m.aliexpress.us/item/3256803277872921.html) if you go this route.

Had to push pretty hard to get the roll arm into the yaw arm socket but it hasn't given me any issues since, and that was three months ago.

If your roll arm didn't make it either, this + a back cover for the camera and front lens ring should do the trick: 10.64US $ 42% OFF|Original Empty Gimbal For Dji Mavic Air 2 Camera Yaw/roll Arm/bracket With Motors Lens Module Component(used Must Be Calibrated) - Drone Accessories Kits - AliExpress

DJI Mavic Air 2 Camera Back Cover Replacement Repair Part | eBay

OEM PULLED PART.

www.ebay.com

I'll look carefully at the startup tonight to make sure there aren't any error messages displaying briefly, but there's nothing when flying.

Yep, no error messages, even on startup

 

[BSauce955]

Yep, no error messages, even on startup

Nicee! Now I can confidently do gimbal repairs! Thanks!

 

[Ishmael S Smith]

Ask DDS.

I'm from Liberia . I want to replace my Dji Air 2s drone with mini 3 gimbal can it work??

 

[billydsumner]

It would depend on how the gimbal is assembled. I haven't opened up an Air 2 gimbal. But if it's anything like the Mini 2's the are pressed on to the motors and don't look to be removable without wrecking the gimbal arms.

So this is an issue I have. The gimbal motors on the air2 s doesn't appear to be accessible. Is this what you found?

 

[pati0furniture]

So this is an issue I have. The gimbal motors on the air2 s doesn't appear to be accessible. Is this what you found?

Yeah, they don't seem to be designed for individual replacement.

 

[DroneWhisperer]

Yeah, they don't seem to be designed for individual replacement.

yes it is, all you need is a Calibration software we technicians have that, complete Softwares for all of Dji drone classifications, like this it Calibrates the tilted gimbal at Horizon level and removes Errors prompting on the screen, if you are planning to Buy those drones and Planning to repair it and sell it as a Business, then we can be a Good Business partner, or you can Buy a Software from me,.