- Joined
- Dec 27, 2018
- Messages
- 8
- Reactions
- 4
Hi All,
There was no problem until the day before,but failed to bypass obstacles during yesterdays 3 test flights.The craft just stops instead of bypassing when the obstacle comes in front or behind of it.Meanwhile, all flights have been done in normal mode with bypass mode active on safety tab.What I have done so far:
-sensors are calibrated succesfully via dji assistant 2 for mavic,
-imu and compass calibrated succesfully,
-both craft and controller s latest firmware (01.00.0340)refreshed via dji assistant 2 for mavic,
-dji fly app (V1.1.8) deleted and reinstalled on my samsung galaxy s6 edge plus(I've always used the same phone until today)
After all the operations mentioned above I made another test flight with no success..As I said, when it detects any obstacle infront or behind it just brakes,nothing more ..
edit:
I encountered a very interesting event on today's flight, I started flying in normal flight mode with bypass mode active as usual. Immediately afterwards I tried various scenarios to see if she can bypass the obstacles she encountered, but the result was same. She just stops instead of bypassing when the obstacle comes in front or behind of it.
Then after, I also thought that I would start the active track/follow mode and try it again, and as a result there was a big surprise!!, I completed the tour without facing any problems, so she did what she should behave.
The new experience what I have gained as a result of my todays trials; if I start with active follow mode at the very beginning of the flight then switch back to normal mode again, there is no problem during rest of the flight. Otherwise it just stops when it meets an obstacle instead of bypassing,very strange behave!!!
anyways I will try to post a short sample video of the said issue as soon as I find an opportunity and I would be pleased if anyone has an opinion on this subject
There was no problem until the day before,but failed to bypass obstacles during yesterdays 3 test flights.The craft just stops instead of bypassing when the obstacle comes in front or behind of it.Meanwhile, all flights have been done in normal mode with bypass mode active on safety tab.What I have done so far:
-sensors are calibrated succesfully via dji assistant 2 for mavic,
-imu and compass calibrated succesfully,
-both craft and controller s latest firmware (01.00.0340)refreshed via dji assistant 2 for mavic,
-dji fly app (V1.1.8) deleted and reinstalled on my samsung galaxy s6 edge plus(I've always used the same phone until today)
After all the operations mentioned above I made another test flight with no success..As I said, when it detects any obstacle infront or behind it just brakes,nothing more ..
edit:
I encountered a very interesting event on today's flight, I started flying in normal flight mode with bypass mode active as usual. Immediately afterwards I tried various scenarios to see if she can bypass the obstacles she encountered, but the result was same. She just stops instead of bypassing when the obstacle comes in front or behind of it.
Then after, I also thought that I would start the active track/follow mode and try it again, and as a result there was a big surprise!!, I completed the tour without facing any problems, so she did what she should behave.
The new experience what I have gained as a result of my todays trials; if I start with active follow mode at the very beginning of the flight then switch back to normal mode again, there is no problem during rest of the flight. Otherwise it just stops when it meets an obstacle instead of bypassing,very strange behave!!!
anyways I will try to post a short sample video of the said issue as soon as I find an opportunity and I would be pleased if anyone has an opinion on this subject