- Joined
- Jan 9, 2019
- Messages
- 51
- Reactions
- 13
Hi guys , brand new mavic pro , camera,gimbal has taken upward impact , and although it starts up and moves in all directions with filming possible I have the following problems
1 lack of manual control of camera and gimbal pushes off to side during flight. Plus vibrates
2 gimbal motor overloaded message
3 recalibration freezes at 10 percent
Due to my stupid user error I don’t want to send it off to DJI so had a look inside and found a small indentation on the flex ribbon cable serving the gimbal. It looks like the force of impact has pushed the gimbal holding bracket into the soft cable. Is it worth sending off for a new cable or should I be looking at motors in gimbal?? Thanks for any advice
1 lack of manual control of camera and gimbal pushes off to side during flight. Plus vibrates
2 gimbal motor overloaded message
3 recalibration freezes at 10 percent
Due to my stupid user error I don’t want to send it off to DJI so had a look inside and found a small indentation on the flex ribbon cable serving the gimbal. It looks like the force of impact has pushed the gimbal holding bracket into the soft cable. Is it worth sending off for a new cable or should I be looking at motors in gimbal?? Thanks for any advice