Hi all, hope all are healthy! I was out flying my pro today using Litchi and had a strange issue. I flew a short waypoint mission at 5km/hr shooting photos for a hyperlapse. Once he mission ended, I took over manual control and continued the hyperlapse for a few more min. Everything seemed ok until Litchi disconnected from the AC. I still had rc connection, thankfully and used RTH. I was never able to regain the connection on that flight. I tried restarting all but the AC as well as using DJI Go 4 to see if that would connect and it wouldn't.
I pulled the logs from the tablet as well as the ac. In looking through the data logs, it appears the IMU and GPS differ quite a bit throughout the flight. There are lots of twists and turns shown on the map that i know from watching the ac never made. Any insight would be greatly appreciated!


I pulled the logs from the tablet as well as the ac. In looking through the data logs, it appears the IMU and GPS differ quite a bit throughout the flight. There are lots of twists and turns shown on the map that i know from watching the ac never made. Any insight would be greatly appreciated!

