Get more from your Mavic
The largest Mavic community in the world
Join Us Now

Mavic pro gimbal firmware warning

John Cowley

Member
Joined
Aug 5, 2018
Messages
5
Reactions
3
Age
65
Visit site
Did you try connecting the Mavic Pro to your laptop using the USB cable and run the assistant program? It detects and can correct more mismatch component issues than just using the controller.
 

sleebus.jones

Active Member
Joined
Jul 25, 2018
Messages
35
Reactions
20
Age
50
Visit site
The whole FW update thing is kinda janky. I did the update with the controller/phone combo and thought everything was fine. I then had to use the assistant at a later date because it was complaining the vision sensors were off. Plugged in and said it needed to update firmware...to the same version that was installed?! Anyway, I let it do that, aligned the vision sensors and went to go fly. Powered up controller/Mavic/Phone, and then the DJI4 app tells me that essentially "not all of my Mavic is activated". Ooooook, hit the box to activate whatever else needed activating and away we went.

Not exactly the smoothest process I've ever been through. I will give a +1 to using the assistant though. MUCH MUCH faster than using the controller/phone.
 
  • Like
Reactions: John Cowley