Mavic pro tablet adaptor.

SNew76 · Nov 20, 2016

I just had to share this. This is the best adaptor I've seen yet. He makes them in 2 sizes. For smaller tablets and bigger tablets.

7"-8" version https://www.etsy.com/listing/487009541/dji-mavic-mavic-air-spark-7-8-tablet?ref=shop_home_active_2
9-10" version https://www.etsy.com/listing/473717916/dji-mavic-mavic-air-spark-9-10-tablet?ref=shop_home_active_1

Sent from my iPhone using MavicPilots

Dynamic3dSolutions.com · Nov 20, 2016

Nice design for a above controller mount. looks bit bulky to carry around tho.

Anthony · Nov 20, 2016

A few weeks back i found someone who made S shaped brackets that clipped into the controller slots and allowed you to slip a tablet into them ..... i dont want a massive bracket thing to hold a tablet ....

I cant find the S shaped grips ....

chuckb223 · Nov 20, 2016

I saw this earlier today too and already ordered one for my iPad Pro 9.7

Dynamic3dSolutions.com · Nov 20, 2016

Anthony said:
A few weeks back i found someone who made S shaped brackets that clipped into the controller slots and allowed you to slip a tablet into them ..... i dont want a massive bracket thing to hold a tablet ....

I cant find the S shaped grips ....

Here's a slim portable version that folds up nicely into dji's mobile device holder:
Slim Portable Fold Up Tablet Mount for Mavic Pro!

niclariv · Nov 20, 2016

Just messaged him about it. I wonder if it reduces range at all because it blocks the line of sight between the antennas and the drone.

Sent from my iPhone using MavicPilots

niclariv · Nov 20, 2016

His reply: There are no interference issues. There is clear line of sight when the drone is in front of you. The tablet mounts in the same location as the tablets on the phantoms and inspires and there's no issues switch those.

Sent from my iPhone using MavicPilots

SNew76 · Nov 20, 2016

Dynamic3dSolutions.com said:
Nice design for a above controller mount. looks bit bulky to carry around tho.

Watch the video it comes apart.

Sent from my iPhone using MavicPilots

Dynamic3dSolutions.com · Nov 20, 2016

SNew76 said:
Watch the video it comes apart.

Sent from my iPhone using MavicPilots

I did.

stealle · Nov 20, 2016

Anthony said:
A few weeks back i found someone who made S shaped brackets that clipped into the controller slots and allowed you to slip a tablet into them ..... i dont want a massive bracket thing to hold a tablet ....

I cant find the S shaped grips ....

Here are the S shaped grips you are most likely talking about (see 23:45 in the video). I think they might eventually become available at Carolina dronz. I think this guy is affiliated with them in some way. The s grips look like the easiest solution for mounting tablets larger than an iPad mini (which fits perfectly without any adapter).

TheLightSpeed! · Nov 20, 2016

SNew76 said:
I just had to share this. This is the best adaptor I've seen yet. He makes them in 2 sizes. For smaller tablets and bigger tablets.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

7"-8" version https://www.etsy.com/listing/487009541/dji-mavic-mavic-air-spark-7-8-tablet?ref=shop_home_active_2
9-10" version https://www.etsy.com/listing/473717916/dji-mavic-mavic-air-spark-9-10-tablet?ref=shop_home_active_1

Sent from my iPhone using MavicPilots

Where can you get this?

Sent from my iPhone using MavicPilots

SNew76 · Nov 20, 2016

TheLightSpeed! said:
Where can you get this?

Sent from my iPhone using MavicPilots

It's on etsy if you click the links it's should take you right to the ordering site.

Sent from my iPhone using MavicPilots

Dynamic3dSolutions.com · Nov 21, 2016

stealle said:
Here are the S shaped grips you are most likely talking about (see 23:45 in the video). I think they might eventually become available at Carolina dronz. I think this guy is affiliated with them in some way. The s grips look like the easiest solution for mounting tablets larger than an iPad mini (which fits perfectly without any adapter).

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

I like the S clips. Small, light & easy to carry. Only thing I don't like about them is it positions the controller arms further out then the controller and at a angle. They just need to be a bit longer so the controller arms are more comfortable to hold in your palm while flying. Also every tablet is different in thickness so there's that.

HueJorgan · Nov 21, 2016

SNew76 said:
I just had to share this. This is the best adaptor I've seen yet. He makes them in 2 sizes. For smaller tablets and bigger tablets.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

7"-8" version https://www.etsy.com/listing/487009541/dji-mavic-mavic-air-spark-7-8-tablet?ref=shop_home_active_2
9-10" version https://www.etsy.com/listing/473717916/dji-mavic-mavic-air-spark-9-10-tablet?ref=shop_home_active_1

Sent from my iPhone using MavicPilots