Hi took my MPP out for its second flight with RC batt at 80% and drone batt at 85%. No problems until batt warning low on drone came up. Was at about 25m from Rth position and only about 3m in the air. Tried to bring drone back to Rth position manually but it would not respond so hit Rth and it went the other way and clipped a bush . Retrieved and checked it over and replaced 1 set of end damaged props, changed battery and did another flight. Had a no signal warning so hit Rth and it came home no problem. Noticed stick settings out on the stick so tried a calibration without success. Took it back to supplier who could not fix so changed out controller. Been too windy to try out.
Question; are previous video / camera settings retained in the DJI go4 app or stored in the controller processor or drone?
Sorry for lengthy post but a newbie and hope explanation is ok