Mavic Snow Flying

[youngie123]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Video from my Mavic at a tree farm yesterday! I think it came out really good, even though I was a little nervous about flying in the wind and snow

 

[Exphantomflyer]

Nice video, i took mine out as well, but it was to dam cold to stay out long

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Vinegar92]

Nice video, but are you not afraid to fly during a snowing? I mean, snow = water, and could be not good for our drones. Anyway, nice effect!

 

[wiggetta]

Nice video, but are you not afraid to fly during a snowing? I mean, snow = water, and could be not good for our drones. Anyway, nice effect!

Flew mine for 20 mins in heavy snowfall, came back bone dry, I reckon the turbulence must keep snow from settling?

 

[4wd]

The dry stuff well below freezing doesn't seem much of an issue.
If it's more borderline and wet I'd keep it very brief.
The motors won't be much bothered, it's drops of moisture penetrating the battery connections which might cause problems.
Fine snow might be drawn in through the fan grill at the front and it would melt possibly on a crucial board.
Leaving the clear cover on might reduce that risk.

 

[youngie123]

Nice video, but are you not afraid to fly during a snowing? I mean, snow = water, and could be not good for our drones. Anyway, nice effect!

Honestly, I kept the cover on the gimbal, and the drone was not wet at all when it landed. I think the propellers “shielded the drone” from the snow/water. (Not saying I recommend it, at all— and there’s always DJI refresh

 

[youngie123]

The dry stuff well below freezing doesn't seem much of an issue.
If it's more borderline and wet I'd keep it very brief.
The motors won't be much bothered, it's drops of moisture penetrating the battery connections which might cause problems.
Fine snow might be drawn in through the fan grill at the front and it would melt possibly on a crucial board.
Leaving the clear cover on might reduce that risk.

I didn’t worry to much about it, and all worked out fine. My gimbal cover was on, and the drone came back bone dry