- Joined
- Oct 15, 2017
- Messages
- 674
- Reactions
- 410
- Age
- 76
Please compare your Mini 2 gimbal to mine.
Notice the dark grey support bar that comes forward with a folding rubber grommet, or bumper or shock absorber mounted on the end which then, on the right bar, connects into the white middle frame. You can even see where part of the rubber sticks thru a little hole on the right side to keep it positioned.
Then look on the left and you will see that the rubber bumper is facing the same way, to the left, and does not connect into the white frame, isn't attached to anything, just lays against the left wall. Seems it also should face the white middle frame and its little nub stuck in the hole there.
Is that normal or should the left side rubber bumper be mounted on the right side of the dark bar with it also having a nub stuck in a hole in the white frame to keep it stable?
The gimbal seems to work fine but that seems so abnormal. When you look at the 3rd photo you can see both rubber supports are on the left side of each dark grey bar, instead of both facing the white frame and instead of BOTH having nubs fitting into the holes in the white frame. Thank you for taking time to look at yours and compare.



Notice the dark grey support bar that comes forward with a folding rubber grommet, or bumper or shock absorber mounted on the end which then, on the right bar, connects into the white middle frame. You can even see where part of the rubber sticks thru a little hole on the right side to keep it positioned.
Then look on the left and you will see that the rubber bumper is facing the same way, to the left, and does not connect into the white frame, isn't attached to anything, just lays against the left wall. Seems it also should face the white middle frame and its little nub stuck in the hole there.
Is that normal or should the left side rubber bumper be mounted on the right side of the dark bar with it also having a nub stuck in a hole in the white frame to keep it stable?
The gimbal seems to work fine but that seems so abnormal. When you look at the 3rd photo you can see both rubber supports are on the left side of each dark grey bar, instead of both facing the white frame and instead of BOTH having nubs fitting into the holes in the white frame. Thank you for taking time to look at yours and compare.


