Move the label

[Janne Swede]

Should change the upper shell of my Mavic Pro Platinum, does anyone know how to move the label with information about the drone to the new shell?

 

[Karl D]

use a hair dryer to soften the glue then slowly peel back from one corner, keep using the hairdryer

 

[Janne Swede]

use a hair dryer to soften the glue then slowly peel back from one corner, keep using the hairdryer

Sounds good, have you tried it yourself?

 

[Starz]

The other choice would be to just keep the old shell for record keeping?

 

[Deleted member 103366]

If the heat thing doesn't work what about soaking in WD40 and then if the label lifts, clean of the WD40 with isopropyl alcohol and stick the label down with fresh glue? No I haven't tried the entire procedure but I have removed labels via soaking in WD40, just test a tiny area first to see anything reacts badly to WD40

 

[THE CYBORG]

Edit, Ninjad by PhiliusFoggg

If you only wanted to remove it I would suggest WD40, it removes the most suborn stickers but I think you may have a problem fixing it to the new shell after using it.

 

[Karl D]

Sounds good, have you tried it yourself?

Many times. changed plenty of shells. Lots of heat from the hair dryer (dont use a heat gun) and pull slowly from one corner straight up.

 

[Janne Swede]

Many times. changed plenty of shells. Lots of heat from the hair dryer (dont use a heat gun) and pull slowly from one corner straight up.

Thanks for that advice, I'll try, maybe heat from the back