DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Drone not pairing

siedlik

New Member
Joined
Jun 13, 2024
Messages
2
Reactions
1
Age
32
Location
UK
Hello,

I bought a used AIR 2, that had props damaged and a tiny crack on a shell arm, and I'm trying to fix it.

When I turn on the drone, I got a
- prop movement
- cooling fan on
- sound that the drone is on I think
- Gimbal is not moving
- Can't pair the drone to the remote
- No lights on the arms

I would assume the drone felt and something happen to the main board.
GPS module is getting 3.3 volts
MainBoard is getting 11.4 volts, 3.3 volts and 1.0 volt.

Are there repair schematics for air 2 somewhere?

I got the drone cheap, so I think I will just sell for parts, as buying new mainboard is not worth it.
 
Welcome.
Whilst the drone possibly is a brick, if the mSD card is still in the drone remove it and see what happens when you switch the drone on.
 
  • Like
Reactions: Cafguy
If you've already got the shell open (if you're testing voltages, that seems very possible) get a good set of magnifying loops and check all the micro connectors are still properly seated. With collisions, they are usually the first thing to jolt loose.
 
  • Like
Reactions: Cafguy
Lycus Tech Mavic Air 3 Case

DJI Drone Deals

New Threads

Forum statistics

Threads
132,740
Messages
1,576,523
Members
161,452
Latest member
Mattew 2025