MP2 Pro, MP2 Zoom + 1 Remote Controller, will it work?
- Thread starter MichiganMavic
- Start date
- Joined
- Oct 12, 2016
- Messages
- 29,896
- Reactions
- 33,617
- Location
- Harrisburg, PA (US)
- Site
- mavichelp.com
Yes, the remote controller is identical. You'll need to relink it each time you switch to a new aircraft.
If I were you, I would just buy a second controller for $200. Who wants to have to rebind every time you fly? It's hard on the hardware to do that dozens of times. Trust me, I know.
Didn’t know about the hardship on the hardware, the reason I was asking.
Thanks for the insight.
I thought I had a line on a bare Zoom , instead of just buying the Zoom camera.
The link button on the AC is flimsy as Rick from DroneValley discovered. It wasn't intended for frequent binding. DJI may have improved it since initial release.
One last thought. The only guys I know who do the "bind" dance are the ones who have one controller with a modded antenna, and another with OEM DJI antenna. If they are going for distance, such as search and rescue people who have limited or no ground access to an isolated area, they use the modded one which gives a strong forward signal. If they are just staying local and goofing around, they use the OEM omnidirectional one.
Yea but he jammed something in there. He's also the one that lost his Anafi sd card clip but at least he didn't break the charging port on the remote (that we know of), so kudos to him!
I've been looking at the bare Zoom as well ever since DJI started selling them. I'm lucky though since I have the Smart controller and thus a spare remote.
Not jam. I think he used a pen tip or paper clip and he didn't think he pressed that hard.
Maybe you're right... I'd check but it was boring the first time, I'm not watching it again!
Similar threads
DJI Drone Deals
New Threads
-
-
-
Can I Purchase Care Refresh from dji if- Started by 1gratedulflyingdawg
- Replies: 6
-
-
Forum statistics
