My image is not level

[minimpw]

My image is always a slight higher on the left side. I calibrated it out of the box. Any thoughts?

Thanks in advance

 

[cobra46]

Sure. Check the manual for Gimball Roll Adjustment.

 

[DodgeP]

I know this sounds like a dumb question but you calibrated it on a level surface correct?

 

[minimpw]

I know this sounds like a dumb question but you calibrated it on a level surface correct?

I just did the calibration where you turn it vertical and horizontal. Is there one specifically for the gimbal?

 

[Filmscum]

It sounds like you may have done a compass cal which has 0 to do with the gimbal. People have also had luck with an IMU cal when their horizon is off.The manual is a truly valuable resource to refer to. There is also a gimbal cal, but what cobra was referring to is a roll adjustment you can do in flight to adjust horizon.

 

[DodgeP]

I just did the calibration where you turn it vertical and horizontal. Is there one specifically for the gimbal?

Yes; there is a different calibration for the gimbal.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[minimpw]

Yes; there is a different calibration for the gimbal.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

This worked great. Thanks again.

 

[___]

This is why I love this forum.

 

[ksull72487]

Jerking it around will throw your horizon off. I've found flying it steady helps as well. It does adjust itself after calibration. So before jumping to conclusions always fly it around after. Certain things actually may not look level at different altitudes


Sent from my iPhone using MavicPilots