Hi,
I have had my Mavic Pro Platinum for just over a month now (bought 16/11/19). Only had it out 4 times due to the weather.
Had a quick flight yesterday in my back garden to check some camera settings before going out today.
Fully charged the 3 batteries and Remote control to 100%, and then left my house and walked to my flying area about 10 minutes away.
The drone and controller were packed in a Smatree Case that has the cut-out for each component to prevent damage.
When i arrived at the flying area, I unpacked everything and setup the drone.
The Mavic Controller power light came on when pressed and bleeped, but nothing was on the display! (screen was backlit, but no LCD display showed nothing)
I connected my ipad mini, everything was working including the Controller functions - just no info displayed on the screen.
I decided to try a flight and everything worked as normal, except for the Controller Display Screen- remained blank despite several power downs and ups.
When i returned home i tried the controller again, but same issue occurred with no LCD display. I switched the controller back off and put it on charge again - screen again was backlit, but no LCD output showing charging state.
Any ideas?
I bought the Drone from Drones Direct (uk), tried calling them but they are now closed for the New Year. Should I be able to insist on a new controller? (don’t fancy a repaired one when it’s only been used 4 times!)
Thanks in advance.
I have had my Mavic Pro Platinum for just over a month now (bought 16/11/19). Only had it out 4 times due to the weather.
Had a quick flight yesterday in my back garden to check some camera settings before going out today.
Fully charged the 3 batteries and Remote control to 100%, and then left my house and walked to my flying area about 10 minutes away.
The drone and controller were packed in a Smatree Case that has the cut-out for each component to prevent damage.
When i arrived at the flying area, I unpacked everything and setup the drone.
The Mavic Controller power light came on when pressed and bleeped, but nothing was on the display! (screen was backlit, but no LCD display showed nothing)
I connected my ipad mini, everything was working including the Controller functions - just no info displayed on the screen.
I decided to try a flight and everything worked as normal, except for the Controller Display Screen- remained blank despite several power downs and ups.
When i returned home i tried the controller again, but same issue occurred with no LCD display. I switched the controller back off and put it on charge again - screen again was backlit, but no LCD output showing charging state.
Any ideas?
I bought the Drone from Drones Direct (uk), tried calling them but they are now closed for the New Year. Should I be able to insist on a new controller? (don’t fancy a repaired one when it’s only been used 4 times!)
Thanks in advance.