DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

PolarPro extension sticks

not unless they make them for the sc, e-mailed them a while back and reply was, no intention to make them for the sc yet, there are other companies around that do make similar for the sc if you wanna wait for slow boat from china
 
But maybe some kind of small extension screw from hardware store that goes to extension stick on one side and into SC on other?
 
You'll be looking for a male/female standoff, like these (see caution below)

Guard4U 160pcs M4 Male-Female Brass Hex Spacer Standoff/Screw Nut Assortment Kit: Amazon.com: Industrial & Scientific

The threaded hole in the SC is only 4.5 mm deep. The male threads on most standoffs will be longer than that, so you will need to either use small washers to "take up" the excess thread length, or cut off or grind off the extra threads. If doing that, best to thread a scrap nut on there first it will clean up the threads when you take it off.
 
I use these adjustable controller stick on my SC. They seem to help me making smoother moves. Look nice too!
 
  • Like
Reactions: EricJT
I use these adjustable controller stick on my SC. They seem to help me making smoother moves. Look nice too!
That is what I have...assists in making slower input(s)....I especially like the extension for slower yawing.
 
  • Like
Reactions: Gindra

DJI Drone Deals

New Threads

Forum statistics

Threads
135,731
Messages
1,609,376
Members
164,180
Latest member
bitfiddler
Want to Remove this Ad? Simply login or create a free account