DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Putting on filters

Dronebow

Well-Known Member
Joined
Oct 12, 2016
Messages
482
Reactions
194
Age
60
I got my TACO-RC filters and have been a bit uneasy about trying to put them on the gimbal because it's so small and fragile. The filters require that you "press" them on and when I tried with the gimbal lock in place I found that is not really a good idea. The gimbal will press backward into the gimbal lock a bit.

So I'm wondering if there is a recommended way to both remove and install the filters on the small and delicate gimbal.
 
I got my TACO-RC filters and have been a bit uneasy about trying to put them on the gimbal because it's so small and fragile. The filters require that you "press" them on and when I tried with the gimbal lock in place I found that is not really a good idea. The gimbal will press backward into the gimbal lock a bit.

So I'm wondering if there is a recommended way to both remove and install the filters on the small and delicate gimbal.

A small tip ... put them on with the drone powered off and with the gimbal clamp still on while holding the gimbal clamp.
 
Yeah, I leave the clamp installed and just hold the camera with one hand while pushing the filter on with the other hand using 3 fingers around different points of the filter edge. The remove the gimbal clamp and start it up. It does not take a ton of force to push it on, it should slide one fairly easily once you push it.
 
A small tip ... put them on with the drone powered off and with the gimbal clamp still on while holding the gimbal clamp.
Ok, I'll try it that way. Unsettling a bit since the clamp doesn't really stop the base from moving.
 
I am nervous about this as well I'm afraid it may brake the gimbal when i put on the filters, and take them off because it puts some force on the gimbal lock.... has anyone noticed this? i have the Taco rc filters
 

DJI Drone Deals

New Threads

Members online

Forum statistics

Threads
138,443
Messages
1,637,338
Members
166,891
Latest member
krupma06
Want to Remove this Ad? Simply login or create a free account