Replace vision sensor module mavic 3 classic

[tedequip]

After replacing the mavic 3 classic vision sensor module with a new one. It says “error sensor vision” and the drone does not take off. Any suggestions? DJi assistant 2 and RC calibration IMU were tried.

 

[GFields]

When it comes to those types of repairs, I send it to DJI

 

[tedequip]

When it comes to those types of repairs, I send it to DJI

Thanks

 

[msinger]

After replacing the mavic 3 classic vision sensor module with a new one. It says “error sensor vision” and the drone does not take off

That's not a common error message. Can you confirm it states "error sensor vision" exactly?

If this error message did not appear before the replacement, then it's possible you installed it incorrectly or the new component is damaged. Parts like this are often harvested from used drones, and they might sometimes not be fully tested before selling.

And then if all else fails, try reaching out to a repair shop for help. If you send your drone into DJI for repair, they will likely send you a refurbished drone in return. So, just something to keep in mind if you're only interested in replacing the part itself.

 

[tedequip]

That's not a common error message. Can you confirm it states "error sensor vision" exactly?

If this error message did not appear before the replacement, then it's possible you installed it incorrectly or the new component is damaged. Parts like this are often harvested from used drones, and they might sometimes not be fully tested before selling.

And then if all else fails, try reaching out to a repair shop for help. If you send your drone into DJI for repair, they will likely send you a refurbished drone in return. So, just something to keep in mind if you're only interested in replacing the part itself.

vision sensor calibration error / Code: 16200202