The manual says that OA is disabled during RTH landing. In experience, once the M2Z has arrived at the set RTH height above the home point, the "Landing" message appears and the warning "OA has been disabled" also appears.
If the terrain is not suitable it stops at about 1m and requests action.
If I understand this correctly, the bottom sensor is still active but the forward/backward ones are not.
Is this correct and is this is how the RTH/Landing process should work?
TIA
Glyn
If the terrain is not suitable it stops at about 1m and requests action.
If I understand this correctly, the bottom sensor is still active but the forward/backward ones are not.
Is this correct and is this is how the RTH/Landing process should work?
TIA
Glyn