Hello, I have a Mavic 2 zoom and was having problems with mine and a slow yaw to the left. I was able to do a calibration and on the screen after returning the left stick from a yaw to the left it would not return to center and had about 20% still showing to the left. When the 20% was present i would then have an additional problem of the zoom roller knob actuating the yaw left and right, all without touching the stick. I dont know if yours shows the calibration on the screen the same as mine but that is where i could see (and record) the issue.
Stick error-zoom yaw.MOV, here is a video of what it was doing. our department drone is doing the same thing as well.
I sent mine to a repair center and they stated it was a problem with the board the stick was attached to losing connection with the remote. it will be back Thursday and it will hopefully be fixed.
hope this helps. Barry
Stick error-zoom yaw.MOV, here is a video of what it was doing. our department drone is doing the same thing as well.
I sent mine to a repair center and they stated it was a problem with the board the stick was attached to losing connection with the remote. it will be back Thursday and it will hopefully be fixed.
hope this helps. Barry
