*SOLVED*Best “Velcro” to fasten dual mounted batteries

[Texas Mavic]

Hey fellow modders and Mavic Pilots. Any cost efficient recommendations on a Velcro fastener that I do not have to use rubber bands as a 2nd safety mechanism to keep my sideboard batteries from falling off? Thanks!!

 

[Former Member]

Are you using one of these? I use a little bit of rubber on the inside, and velcro on the outside. Works well.

 

[Texas Mavic]

Are you using one of these? I use a little bit of rubber on the inside, and velcro on the outside. Works well.

View attachment 71157

No sir, I have cheap dollar store Velcro and two rubber bands?sadly but truthfully

 

[Texas Mavic]

I’ll trade you a Mavic 2 USB dual adapter for one of those if you have an extra

 

[Former Member]

Here's one on Etsy for you. I would trade you mine, but I need it for a project.

DJI Mavic Pro Dual Battery Mounting Bracket - Etsy

A simple clip-on bracket which enables you to add 2 additional (non-DJI) batteries to the Mavic. This mounting bracket enables you to add additional R/C batteries to your Mavic for extended flight time and redundancy. The bracket is supplied with 2 hook and loop straps for securing the batteries to

www.etsy.com

 

[Texas Mavic]

Do you have a 3D print guy you can recommend?

 

[Former Member]

Do you have a 3D print guy you can recommend?

Sending you a Pm

 

[Flycaster]

You might try this:

3M SJ3560/CLR1333 Scotch SJ3560 Dual Lock 250 Reclosable Fastener: 1" x 10 ft, Clear: Adhesive Hook And Loop Strips: Amazon.com: Industrial & Scientific

3M SJ3560/CLR1333 Scotch SJ3560 Dual Lock 250 Reclosable Fastener: 1" x 10 ft, Clear: Adhesive Hook And Loop Strips: Amazon.com: Industrial & Scientific

www.amazon.com

Much better than the old hook/loop cloth velcro. Very strong bond..

 

[Texas Mavic]

You might try this:

3M SJ3560/CLR1333 Scotch SJ3560 Dual Lock 250 Reclosable Fastener: 1" x 10 ft, Clear: Adhesive Hook And Loop Strips: Amazon.com: Industrial & Scientific

3M SJ3560/CLR1333 Scotch SJ3560 Dual Lock 250 Reclosable Fastener: 1" x 10 ft, Clear: Adhesive Hook And Loop Strips: Amazon.com: Industrial & Scientific

www.amazon.com

Much better than the old hook/loop cloth velcro. Very strong bond..

Fantastic thank you

 

[Texas Mavic]

Are you using one of these? I use a little bit of rubber on the inside, and velcro on the outside. Works well.

View attachment 71157

Just now seeing this!!! I rarely use the Mavic Forum App, but when I do, I often see posts and replies that I don’t when I am in through a browser. Do you have that issue too?

 

[Former Member]

Just now seeing this!!! I rarely use the Mavic Forum App, but when I do, I often see posts and replies that I don’t when I am in through a browser. Do you have that issue too?

Yeah, the app is not as strong as the PC version, but you can see different stuff. Strange.