Tablet holder for Air 2

[Rcthethird]

Just a quick vid on making a tablet holder for the Air 2 controller. Took ten mins to bend up and quite effective.
Hope this helps someone.

 

[Rcthethird]

Was unable to post vid but hope pic will do.

 

[Zee_Bass]

For those of you with a 3D printer looking for an iPad Mini mount I printed one yesterday and it works pretty good. The lip of the ipad doesn't quite set all the way into the top but it's still pretty secure after some testing.

Here is the link to the 3d model:

Tablet Holder for DJI Mavic Air 2 by Sven_Jakob

Simple holder for 8-inch tablets on the DJI Mavic Air 2 Remote. Support needed for printing. 22-May-2020: I have added a second improved version. Turn clockwise to clamp it between the two rods of the remote. 23-May-2020: I added a Sunshade for the iPad Mini that is compatible with Version 2 of...

www.thingiverse.com

 

[Zee_Bass]

Here is a pic of the finished product. Around a 3.5hr print with my current settings.

 

[Dronarium]

Just a quick vid on making a tablet holder for the Air 2 controller. Took ten mins to bend up and quite effective.
Hope this helps someone.View attachment 102357

clever

 

[wolframmitbach]

I liked this solution immediately and built a similar clip. Its an excellent and simple solution. But on my first flight I lost connection at about 300 meters even holding the remote Control in a way that the tablet did not obstruct the antenna. I'm concerned now that the small distance between antenna and tablet might be the reason for this. Any opinions / experiences? Rgds Wolfram

 

[Zee_Bass]

I liked this solution immediately and built a similar clip. Its an excellent and simple solution. But on my first flight I lost connection at about 300 meters even holding the remote Control in a way that the tablet did not obstruct the antenna. I'm concerned now that the small distance between antenna and tablet might be the reason for this. Any opinions / experiences? Rgds Wolfram
View attachment 104113View attachment 104114

Maybe try one like this the raised it up.

 

[wolframmitbach]

Thx working on SN2! ??

 

[Zee_Bass]

Thx working on SN2! ??

What printer do you have?

 

[Dronarium]

I liked this solution immediately and built a similar clip. Its an excellent and simple solution. But on my first flight I lost connection at about 300 meters even holding the remote Control in a way that the tablet did not obstruct the antenna. I'm concerned now that the small distance between antenna and tablet might be the reason for this. Any opinions / experiences? Rgds Wolfram
View attachment 104113View attachment 104114

yes it obstruct the antenna even with Ipad mini ,be aware

so if i wont to go fahr. I us my Samsung 8S.. 3-5 km no problem

 

[sigi.stiemer]

Just a quick vid on making a tablet holder for the Air 2 controller. Took ten mins to bend up and quite effective.
Hope this helps someone.View attachment 102357

That is pretty clever!