Brewsky666
Well-Known Member
- Joined
- Dec 24, 2016
- Messages
- 113
- Reactions
- 41
- Age
- 53
Well I flew today and tested with 2 batteries it didn't get hot at the bulge spotMine flew perfect,I had no issues whatsoever and was really enjoying flying it. But after noticing the bulge something is definitely getting hot to cause the case to swell,as pointed out in earlier post this could create an electrical short. Not what you want at 100ft up flat out in sport mode,it's not going to pretty when it hits the deck.
E-mailed DJI support last night,got a reply this morning saying they are looking into it and will get back to me later. Think it could well be a few days due to Chinese New Year but will of course pass on what they say.
To be safe vis a vis warranty etc, I would notify DJI and see if they request returning it for inspection.View attachment 5295 View attachment 5296 View attachment 5297 Hi folks
Had my Mavic just over two weeks and really enjoying it. Just back from my latest flight used all three of my batteries no problems at all,now got just under 2 hours total flight time and no crashes.
Packing up after today's flight noticed some small marks more like a bulge on the front and top of the bird,these weren't there before this mornings flight. Looks like something inside has swollen pushing the casing out. Hope someone has an idea what's going on,or should I just send it in.
This is what's beneath;
The one on the front looks like it was caused by the fan. Taking a guess it was blowing some mighty hot air.
Don't see any real heat sorce tho.
If you look at how the gimble is attached.. it is possible that the screw they used on that side to attach it was a tad to long and after it got warm bulged it up a bit.... Screw machines are not perfect.View attachment 5295 View attachment 5296 View attachment 5297 Hi folks
Had my Mavic just over two weeks and really enjoying it. Just back from my latest flight used all three of my batteries no problems at all,now got just under 2 hours total flight time and no crashes.
Packing up after today's flight noticed some small marks more like a bulge on the front and top of the bird,these weren't there before this mornings flight. Looks like something inside has swollen pushing the casing out. Hope someone has an idea what's going on,or should I just send it in.
Its pregnant! Has it been around other Mavics lately?
I really don't know what that might be.
They have been pretty good about getting back to people recently.
I've had my Mavic just over two weeks to and under 2 hours total flight time and no crashes. only have 2 batteries I have noticed the same thing but on other side. I'm returning for refund had other problems to 1 of them cant get smooth yaw when lowering at 3 m/s and abnormal gimbal vibrations when not windy I DONT FLY WITH GIMBAL COVER ON. Pics bit hard to see
Was cold this morning I'm in Yorkshire UK,But above freezing all the morning frost had melted probably 4 of 5 degrees C, lovely and sunny with no wind so ideal flying conditions.
Hey Chippy,
Did you get this resolved with DJI?
Yes drone was sent back and got a new one in return. Serial on new Mavic shows as manufactured February 9th 2017 old one was 22nd November 2016, so not a bad result. Been out at least once a week since and all good so far.
We use essential cookies to make this site work, and optional cookies to enhance your experience.