DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Thinking of getting the RC Pro 2 for my Mini 5 Pro

guzewski

Well-Known Member
Joined
Dec 8, 2021
Messages
103
Reactions
53
Age
69
Location
Ottawa, Ontario, Canada
Yeah I know it's pricy, but it's really tempting.

Does anyone know if the RC Pro 2 fits in the stock bag you get with the Mini 5 Pro? The middle compartment seems pretty roomy (I heard it can store a pair of goggles)

If anyone has the RC Pro 2 I'd love to year your general comments about it.
 
Last edited:
Yeah I know it's pricy, but it's really tempting.

Does anyone know if the RC Pro 2 fits in the stock back you get with the Mini 5 Pro? The middle compartment seems pretty roomy (I heard it can store a pair of goggles)

If anyone has the RC Pro 2 I'd love to year your general comments about it.
It does not fit. The wider screen makes it to tall and the zipper will not close. I have both paired, Mavic 4 Pro and the Mini 5 Pro. I will be looking at some small sling bags. I have the M4P in a Thinktank Photcross 13 and it fits perfect. I may try the Photocross 10 for the 5.
 
It does not fit. The wider screen makes it to tall and the zipper will not close. I have both paired, Mavic 4 Pro and the Mini 5 Pro. I will be looking at some small sling bags. I have the M4P in a Thinktank Photcross 13 and it fits perfect. I may try the Photocross 10 for the 5.
Another DJI mistake. :rolleyes:
 
It does not fit. The wider screen makes it to tall and the zipper will not close. I have both paired, Mavic 4 Pro and the Mini 5 Pro. I will be looking at some small sling bags. I have the M4P in a Thinktank Photcross 13 and it fits perfect. I may try the Photocross 10 for the 5.
Ah... such a shame. But I did suspect that.

The Thinktank stuff looks nice, But what I may try, if I get the RC Pro 2, is to figure out some way to fasten it to the top of the Mini 5 bag for transport.
 
Ah... such a shame. But I did suspect that.

The Thinktank stuff looks nice, But what I may try, if I get the RC Pro 2, is to figure out some way to fasten it to the top of the Mini 5 bag for transport.
I found the dimensions of the RC Pro 2. Your are correct, sir. No way it'll fit in the stock Mini 5 bag:

Key Dimensions & Specifications
  • Dimensions: 182 × 139 × 61 mm (Length × Width × Height) when folded.
 
It does not fit. The wider screen makes it to tall and the zipper will not close. I have both paired, Mavic 4 Pro and the Mini 5 Pro. I will be looking at some small sling bags. I have the M4P in a Thinktank Photcross 13 and it fits perfect. I may try the Photocross 10 for the 5.
I made it work but it is ugly. After getting the divider out of the way the controller fits flat under the M5P. I have the controller in a soft pack below. 20251001_164618.jpgVery poor design. Each divider is sewn in on one side with no options to reconfigure. All you can do is fold them out of the way.
 
I made it work but it is ugly. After getting the divider out of the way the controller fits flat under the M5P. I have the controller in a soft pack below. View attachment 185598Very poor design. Each divider is sewn in on one side with no options to reconfigure. All you can do is fold them out of the way.
Interesting approach. I have camera bags that have dividers attached by Velcro, so you can configure them pretty much any way you want. That would be useful.
 
Yeah I know it's pricy, but it's really tempting.

Does anyone know if the RC Pro 2 fits in the stock bag you get with the Mini 5 Pro? The middle compartment seems pretty roomy (I heard it can store a pair of goggles)

If anyone has the RC Pro 2 I'd love to year your general comments about it.
Yes! I managed to it into my stock bag with the antennas down, allowing it to be pulled out by an attached strap, and a silicone screen cover. Fits in the middle, with room for everything it came with except the original controller it replaces.
Bag zippers snugly and folds out open, too, allowing easy access. Just don't put anything in the top zippered pocket. Use the front right for propellers, charger and cables.
IMG_5329.jpeg

IMG_5330.jpeg
 
Last edited:
  • Like
Reactions: PAW
Interesting approach. I have camera bags that have dividers attached by Velcro, so you can configure them pretty much any way you want. That would be useful.
I assume you're a ground camera photographer as well.Do you have the usual minimum of 5 camera bags collected over the years?😜
 
Yeah I know it's pricy, but it's really tempting.

Does anyone know if the RC Pro 2 fits in the stock bag you get with the Mini 5 Pro? The middle compartment seems pretty roomy (I heard it can store a pair of goggles)

If anyone has the RC Pro 2 I'd love to year your general comments about it.
I have the RC Pro 2 and the Mini 5 Pro. To Be Honest I haven't tried testing it out in the bag that came with it? I've spent the past week looking for a hard case to hold the Mini 5 and the RC Pro 2 in one case. So far no luck. A couple companies have claimed to be working on it. But I guess I'll check out the soft bag when I get home. I'm just a hard case guy.
 
Last edited:

DJI Drone Deals

New Threads

Members online

Forum statistics

Threads
139,009
Messages
1,643,521
Members
167,313
Latest member
drones404
Want to Remove this Ad? Simply login or create a free account