Tripltek Tablet Holder

[spudster]

Has anyone used the holder that Tripltek sells for their tablet? Opinions?

 

[MA2 317]

Has anyone used the holder that Tripltek sells for their tablet? Opinions?

I'm not sure which one you sure you are referring to, but if it's the adapter that attaches to the antenna, I would shy away from that as the Tripltek tablet is heavy and may put undo stress on the antenna mast.


If you were looking at the LifThor type of mount system, I highly recommend it as it is rock steady when used with the Tripltek adaptor that's available from their site.

LifThor Shop - Premium Drone Accessories by Thor's Drone World

Tho's Drone World - The creators and manufacturers of LifThor Products . Ultimate accessories for the Drone Industry. All our products are exclusively made and shipped from Norway. Holder for DJI Mavic Series and Autel EVO, directly from its manufacturer. Product of Norway. Lifthor Mjolnir for...

www.thorsdroneworld.com

I have the Tt Pro and the Lifthor for the MA2 and couldn't be happier with my rig.


.

 

[spudster]

I'm not sure which one you sure you are referring to, but if it's the adapter that attaches to the antenna, I would shy away from that as the Tripltek tablet is heavy and may put undo stress on the antenna mast.

I've heard that thrown around a lot. The Air/Mini style controller has been around a long time. In all of the time this controller has been in use has anyone ever claimed that the antenna has been damaged by the use of an adaptor that uses it as a mounting point?

 

[Thomas B]

Has anyone used the holder that Tripltek sells for their tablet? Opinions?

Search of the forum turns up a lot of info.

 

[spudster]

Search of the forum turns up a lot of info.

Tried it again and results showed up. Not sure why my first search didn't show anything, maybe fat fingers typed the search in wrong.

 

[crlmjohnson]

Has anyone used the holder that Tripltek sells for their tablet? Opinions?

I own a Ultra Crystal Sky and a Tripltek Pro.

 

[spudster]

I looked through all of the posts and didn't see this. Has anyone used the DJI mount with the Tripltek? I like that it wraps around the controller and mounts it lower for better balance.

Buy DJI RC-N1/N2 Remote Controller Tablet Holder - DJI Store

Shop for DJI RC-N1/N2 Remote Controller Tablet Holder on the official DJI Online Store. Find great deals and buy DJI products online with quick and convenient delivery!

store.dji.com

 

[MA2 317]

I've heard that thrown around a lot. The Air/Mini style controller has been around a long time. In all of the time this controller has been in use has anyone ever claimed that the antenna has been damaged by the use of an adaptor that uses it as a mounting point?

I actually haven't read anything yet about damage to the mast.

I think using the adapter for an iPad mini or similar tablet shouldn't be a problem.

The Tripltek is heavy, 1.5 pounds if I recall, much heavier than the average tablet, and I would think that's a little much for holder. ?

DJI designed the remote for a phone and not heavy tablets.

.

 

[torsen]

I'm using the Tripltek two part adapter for the Mini 2 remote with my Tripltek Pro, and I don't think it stresses the mast too much, I'm very happy with it. Sure the tablet is very heavy but the whole lot feels very secure...

DJI Mavic Air 2/Mini 2 Adapter 2 parts included | TRIPLTEK

 

[Cadillac2012]

I use the controller enhancement kit with tablet mount on my Mavic Air 2 and Tripltek tablet. Rock solid and does not stress the antenna when installed.

Shop - Sky Fire Aerial

skyfireaerial.com

 

[GFields]

Aerial Pixel makes a good one. I have one on order

 

[Jagerbomb52]

Aerial Pixel makes a good one. I have one on order

Do you have a link to the holder? I tried searching but came up with nothing.

 

[GFields]

Do you have a link to the holder? I tried searching but came up with nothing.

Here ya go

 

[Jagerbomb52]

Here ya go

Perfect
Thank you

 

[Jagerbomb52]

Aerial Pixel makes a good one. I have one on order

I received my Aeria Pixel Tripltek tablet holder this morning. Very well built. Shipping to Canada was excellent.
The bottom of the tablet could use some sort of clamp but giving the controller a good shake the tablet did not fall out and seemed secured. For the price this is nice piece of gear to have for the larger Tripltek tablets.

 

[Urkitt]

Has anyone used the holder that Tripltek sells for their tablet? Opinions?

I have used stl version of the tripletek mount for several months. Wanted something more simple and easier to install. I always felt it was stressing the mount on the remote. I spent several hours trying several designs for my 3d printer but all were clunky and difficult. I decided to go simple and just use the KISS method. This is my simple design and loaded it on thingiverse today. Hope it's useful for others.

Tripltek Mavic Air 2 Mini 2 Mount by urkitt

My solution for the least complicated mount for my Tripltek 7 inch tablet to my Mavic Air 2 remote controller. No need to remove from tablet. Easy to store. Quick to connect. Just bend to install no need to remove any screws.

www.thingiverse.com