Looking for input on the camera signal cable connector on the top of gimbal mainboard pictured below, dose anyone any of (name, type, PN or where to find it). thanks
I am looking for info (name, type, and size etc.)on the port that the camera/gimbal ribbon plugs into the on the motherboard. I appreciate any help yall can provide
Looks like 2 connectors, is it at the top or bottom of the picture?
Without a pin count and size dimensions or part #, it's very difficult to pin down exactly.
You can search Mouser.com or digikey.com which carry electrical components but be aware there are literally several hundred thousand connectors on each site...
On the top side of board the 40 pin that I am looking for supplies the camera and Roll motor, the one on bottom(16 pin)
goes to the Core board then on the other side of the Gimbal main board is another 16 pin which goes to the Yaw motor
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.