Updating to V01.00.0620

Jamie Preston · Jul 25, 2020

Been stuck on 49% now for about 5 minutes, I got a message said to plug data cable into the back of the aircraft and then unplug.... it did this. Should the other end of the data cable been plugged into something too?? Seems to be in limbo at 49% updates???

lannes · Jul 25, 2020

I normally prefer to use DJI Assistant 2 on the PC to update the RC and PC, it just seems a more stable process.

KingRat · Jul 26, 2020

This is going to sound daft, I know - but where do you find the DJI Assistant 2 that they talk about in the video? I have looked down my internet list and it isn't there. (The list on the left that comes up with the places you save).

The more I try to find about flying the drone, the more confused I am getting. Do I have to update the controller and helicopter? Or can you just fly it as is and not worry about it?

lannes · Jul 26, 2020

KingRat said:
This is going to sound daft, I know - but where do you find the DJI Assistant 2 that they talk about in the video? I have looked down my internet list and it isn't there. (The list on the left that comes up with the places you save).

The more I try to find about flying the drone, the more confused I am getting. Do I have to update the controller and helicopter? Or can you just fly it as is and not worry about it?

For the MA1, it's at the bottom of this webpage

Mavic Air - Download Center - DJI

Learn and download Mavic Air related apps, software, and manuals at the DJI Download Center

www.dji.com

Usually DJI Go4 will tell you when there is a firmware update for the remote controller and the aircraft and you can use DJI Go4 to update but it's a bit more prone to error.
The DJI Assistant 2 process is an alternative and I find it to be more controlled and less risky process

KingRat · Jul 26, 2020

lannes said:
For the MA1, it's at the bottom of this webpage

Mavic Air - Download Center - DJI

Learn and download Mavic Air related apps, software, and manuals at the DJI Download Center

www.dji.com

Wow that was quick. Thank you very much. Is it a necessary thing to do? I worry I am going to get these things wrong and muck the whole lot up.

KingRat · Jul 26, 2020

Been and had a look - there are two thigs:
Download exe
Download zip

which one do I need? Or is one for the helicopter and one for the control centre?

lannes · Jul 26, 2020

KingRat said:
Wow that was quick. Thank you very much. Is it a necessary thing to do? I worry I am going to get these things wrong and muck the whole lot up.

As I mentioned the DJI Go4 will notify you when there is an update required, with the MA1 given that it's out of production you might already be up to date.
I'm not expecting any further firmware upgrades as the model has been superseded

lannes · Jul 26, 2020

KingRat said:
Been and had a look - there are two thigs:
Download exe
Download zip

which one do I need? Or is one for the helicopter and one for the control centre?

Download.exe for both the remote controller and aircraft, follow the video explicitly

KingRat · Jul 26, 2020

I shall have a look and see if I can manage it. Thank you for your help. I have been trying to get DJI to help, but they expect you to understand everything... I think it is a bit beyond me to be honest.

Dave Maine · Jul 26, 2020

.exe is a program ready to execute. The .zip is the same app compressed to save file size and help speed the download. The zip file will expand to become identical to the .exe.

gianni_BT · Jul 29, 2020

Anybody knows what is the last firmware version? My MA1 ha V01-000420 and the App says "Last Version".Where the version in the title of this discussion is coming from?

lannes · Jul 29, 2020

gianni_BT said:
Anybody knows what is the last firmware version? My MA1 ha V01-000420 and the App says "Last Version".Where the version in the title of this discussion is coming from?

Looks like you haven't updated the firmware since the 3rd of May 2018, you must have ignored all the messages

https://dl.djicdn.com/downloads/Mavic%20Air/20190410/Mavic_Air_Release_Notes_en.pdf

In DJI assistant 2 you'll need to do it sequentially, until you get up to the latest 0.620

gianni_BT · Jul 30, 2020

I received my MA1 in october 2019. When I started for the first time I was prompted to upgrade the firmware for both RC and model and I made it. After that no more prompt was given by DJI4 App and, when I switch on the model, the firmware check says "Last version".I never used DJI assistant 2.
Another qwestion: what is the last version of RC firmware?