Hello everyone.
I have flown two Waypoint 2.0 missions now and have questions about what is happening when the signal between the drone and remote controller (RC) is broken.
I had checked the continue task option for what should happen if the signal was interrupted or lost for both missions. During both missions the signal was broken. Am happy to report I was able to bring the drone back both times but here are the questions.
Any insights on what is going on here will be appreciated!
I have flown two Waypoint 2.0 missions now and have questions about what is happening when the signal between the drone and remote controller (RC) is broken.
I had checked the continue task option for what should happen if the signal was interrupted or lost for both missions. During both missions the signal was broken. Am happy to report I was able to bring the drone back both times but here are the questions.
- When reviewing the videos from both flights, the drone stops moving after the signal is broken and continues to film without moving for slightly more than two minutes. Is this normal or is it due to some error in made in setting up the WP flight?
- Related to the continue task option. I understand that when RTH is not overridden in the Waypoint Mission parameters (meaning the Continue Mission option when the connection is broken is NOT checked) that when signal is lost the drone will retrace its flight path and attempt to return to the point where signal had been lost. Does it do this in a WP flight when the signal is broken if I have checked the continue task option?
Any insights on what is going on here will be appreciated!