Get the most from your Mavic
Join thousands of Mavic owners helping each other
Join Us Now

Woox USB QC3.0 wall charger not suitable for Mavic Mini

raulmavic

Well-Known Member
Joined
Nov 27, 2019
Messages
69
Reaction score
30
Location
spain
Hi,

I'm a happy owner of a basic package of Mavic Mini. That means no charger included.

After reading a lot I bought this Quick Charger 3.0 compliant one. Charger available at Amazon Spain WOOX WA2386 Cargador con Cable Micro USB QC3.0: Amazon.es: Electrónica

WOOX WA2386 WHITE MICRO USB CABLE CHARGER QC3.0

woox wa2386 qc3 usb charger.jpg
Unfortunately charger it's not working right with Mavic Mini. It only charges at low current with Mini status led flashing at very low rate.

Charger it's clearly marked as QC3.0 compliant.

Any thoughts ?

Thanks in advance.

R.
 

raulmavic

Well-Known Member
Joined
Nov 27, 2019
Messages
69
Reaction score
30
Location
spain
Check your cable if it's qc compatabile
Thanks a lot for your advice.

I tested both cables, the new one included into charger box and the stock one included into Mavic package.

For me, cable is not the problem.

Any other idea ?

Can someone share their working third part USB charger model ?

R.
 

Eka

Active Member
Joined
Dec 27, 2019
Messages
36
Reaction score
61
Age
38
Location
Serbia
Could it be that mini itself isn't qc compatabile, but charging hub only is? Will try it myself next time. QC works with charging hub and i charge it that way only.
 

pelagic_one

Well-Known Member
Premium Pilot
Joined
Dec 29, 2019
Messages
272
Reaction score
210
Age
54
Location
Alameda, California USA
It only charges at low current with Mini status led flashing at very low rate. Charger it's clearly marked as QC3.0 compliant.
From the specs found online: “Salida: 5V3.1A/9V1.8A/12V1.8A” —. Someone will correct me if I’m wrong, but it appears that this Woox WA2386 is only charging the Mini at 1.8 amps, although it is rated as QC3.0 compliant.

In order to get a quick charge on my Mini, the output of whatever charging block needs to be at 3.0 amps per USB port. I’ve plugged into lower amperage ports (lower than 3.0 amps) and get the slower charging speeds, too.
 

raulmavic

Well-Known Member
Joined
Nov 27, 2019
Messages
69
Reaction score
30
Location
spain
From the specs found online: “Salida: 5V3.1A/9V1.8A/12V1.8A” —. Someone will correct me if I’m wrong, but it appears that this Woox WA2386 is only charging the Mini at 1.8 amps, although it is rated as QC3.0 compliant.

In order to get a quick charge on my Mini, the output of whatever charging block needs to be at 3.0 amps per USB port. I’ve plugged into lower amperage ports (lower than 3.0 amps) and get the slower charging speeds, too.
You are right, printed specs over charger box didn't match a true QC3.0 it should be 9v/2A and 12v/2A

I'm afraid they scammed me ...

WOOX WA2386 WHITE MICRO USB specs.jpg

R.
 
  • Like
Reactions: pelagic_one
All E RC Mavic Drones

New Threads

Forum statistics

Threads
80,350
Messages
930,181
Members
108,642
Latest member
Mark Looman