Recent content by Koelkop

Where do you normally take off from? Have you tried calibrating the compass? It sounds like something is interfering with the compass

Nobody here have an idea as to what it can be?

Hi all, In the last 3 months or so I noticed the video would glitch now and then like in the screenshot but its only for a split second and then its gone. It shows on the main videos as well. Can it be the data cable(video cable?) in the gimbal? Bird has now flown almost 300 flight hours. Last...

post the flight logs so Sar can tell you what happened

Do not take off from anything magnetic, the app does not always warn you before takeoff that the compasses is faulty. I have had it happen to me after i took off from a vehicle. Nothing showed wrong but a minute into the flight it went into atti mode.

At 0:46 and 1:50 in that video you can see it has omni directional wheels

Not too much dust but noticeable. Will electrical contact cleaner be safe to use or will it wash out the thermal paste as well? Compressed air is probably safer? ps. a broken prop works really well as a pry tool ?

I will do my best not to screw it up lol. I diy most of my electronics stuff. When the car charger popped the little ceramic fuse in the plug I fixed it myself. And I took the spark I had apart to see whats inside and it flew after that :p

That is on the motor with a lot of vibration, Thunderdrones is talking about the ones that screw into plastic on the shell

The motors still look clean and they have zero play in any direction. I am worried about dust and stuff on the inside on all the components.

Hello all, I have done a lot of flying with my mpp over 13 months. I have now flown over 260 hours. I live in quite a dry climate so there is inevitably dust in the air. I noticed traces of dust accumulated at the fan intake. Now im wondering if at some point it might be necessary to take...

maybe try run the calibration for the controls. When I accidentally hold the stick or scroll wheels while it started up it will say stick error or wheel error on the mavic pro controller.

It has never failed me because it is always turned off ?

You need to run Dji assistant on your computer and have a long enough usb cord. Then go to calibrations in dji assistant, the vision sensor stuff will be there

My batteries are now 13 months old with no swelling at all. They work hard:)