Ok, 1st question.....and I know this is on the threads here and as much reading as I have done I have not seen a "solved", or at least one that has worked for me. I get a "no image transmission signal" error upon startup, and it gives me an "error code 200" Check whether aircraft is connected to USB " message.
Steps Taken: Updated All firmware for aircraft and remote, as well as software (DJI 4)
Reformatted and inserted SD card as per suggestions on other threads...didn't work..and I tried 2 different cards
Used multiple USB cables and 2 different devices ( iPad mini 4 and Iphonee XS)
Additionally I occaissionaly get a Gimble Overload message, which seems to be common with people having the same issue as above.
2nd Question...is it normal to hear the internal fan running, and occasionally loudly, even when the aircraft is sitting idle ( no motors running) but turned on?
Thank you!
Steps Taken: Updated All firmware for aircraft and remote, as well as software (DJI 4)
Reformatted and inserted SD card as per suggestions on other threads...didn't work..and I tried 2 different cards
Used multiple USB cables and 2 different devices ( iPad mini 4 and Iphonee XS)
Additionally I occaissionaly get a Gimble Overload message, which seems to be common with people having the same issue as above.
2nd Question...is it normal to hear the internal fan running, and occasionally loudly, even when the aircraft is sitting idle ( no motors running) but turned on?
Thank you!