I am getting an abnormal vibration error on the app both on the ground and in air. I have checked the gimbal and it is inserted correctly and has not been crashed or hard landed. Any ideas? Thanks guys
First welcome, wonderful craft you have bought. I have the MP1, still amazed by it's tech.
Have you recently change props? Check to see if they are properly attached, check for damage and if you have a spare set, change them out to see if that solves the issue. Some had issues using aftermarket props (even the high quality ones like the Master Screws) with gimbal vibrations.
There are tiny black rubber bands that hold/dampen the gimbal, check those also. Good luck.
Noticed the title states it occurs on the ground also. Is this without the props spinning? If it's without you may need a new ribbon cable.
Hi! My Mavic Pro (purchased May 2017) gimbal has started to shake and randomly move midflight, making any real filming or photography very hard. Looking for other users experiences about this, is it just that I need to replace the whole gimbal unit, or can I get away with something cheaper...
mavicpilots.com
Here is an older thread where Fox posted some helpful videos.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.