Air 2S - IMU Calibration Won't Start

[Dandamans]

I have a Air 2S with less then 10 hours flight time and never crashed but have owned it around 4 years. I stored the drone away in the fall and now in the spring when I turn it on I have many errors:

Flight Checklist

Unable to Take Off

IMU calibration required. Calibrate IMU (Code: 30050)

Calibrate

No satellite positioning signal. Unable to hover. Fly with caution(Code: 30007)

Gimbal unable to connect. Repairs required. Contact DJI: Support for
assistance(Code: 40012)

Gyroscope initialization failed. Restart aircraft Code: 30045)

Barometer initialization failed. Restart aircraft(Code: 30047)

Satellite positioning signal weak. Positioning accuracy affected. Fly with
caution(Code: 30049)

I believe that it mostly has todo with the IMU calibration but it will not let me hit the start button at all. No matter how many times I press it. I don't have any warranty or care plans.

Thanks for the help!

 

[PakNheat380]

Welcome to the forum from NW Montana. With all your listed issues I’m sure one of our many expert members will be able to give you some advise.

 

[Cafguy]

Check the Following
1. Is all firmware up to date? is the copy of assistant up to date also?
2. Are you trying to calibrate indoors?......Move away from metal and concrete.
3. have you been in a hard landing or crash?
4. YES THIS IS A THING>>>>>>>Take a popsicle stick and gently tap out a tune on the front of your Air2s between the front sensors. give it a few good hard taps....Restart and try to Calibrate.
5. If none of these will get it going then you just may have a bad IMU.

 

[Laborous]

Welcome to the forum from the beautiful woods of Maine!
I use an Air 2s but haven’t had any of these issues so I will default to Cafguy’s recommendations.

 

[LoudThunder]

I have a Air 2S

Welcome from the Hampton Roads area of Virginia, USA. We have a Member's Map in the Upper Right of the Title Bar. Click on "Members" and then Click on "Member's Map…" Check it out and you might find some new flying friends.

Member Map

mavicpilots.com

I am sorry to hear of your problems, Good luck with the solution.

LT Signing off…

 

[MA2 317]

Hello from the Crossroads of America Dandamans.

Nice to meet you.

Welcome to the Forum.

 

[GFields]

Greetings from Birmingham Alabama USA, welcome to the forum! We look forward to hearing from you!

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[SpitFire]

Greetings fro Chicago the Windy City, welcome to the forum.
FLY SAFE & FLY SMART
We have lots of very knowledgeable pilots here, one of them will help you.

 

[sarahb]

Welcome!