APAS not on screen to activate on and off

[cagliostro]

Hi, after updating to the latest firmware I no longer see the APAS OPTION on the screen no more? Can anyone help please ? Thanks in advance!

 

[Point Zero]

It wont show on your OSD if you are set to Sports Mode on your RC, maybe that is the issue here?

 

[Roamer105]

Hi, after updating to the latest firmware I no longer see the APAS OPTION on the screen no more? Can anyone help please ? Thanks in advance!

Go through all settings and check them. This latest update reset almost everything. Enable intelligent flight modes - that should do it.

 

[Point Zero]

Go through all settings and check them. This latest update reset almost everything. Enable intelligent flight modes - that should do it.

Very good point. I had forgotten that the update reset the flight modes to being off by default!

 

[cagliostro]

It wont show on your OSD if you are set to Sports Mode on your RC, maybe that is the issue here?

Was in normal flight mode... I will go through all settings, thanks for your reply!

 

[cagliostro]

Go through all settings and check them. This latest update reset almost everything. Enable intelligent flight modes - that should do it.

Will give a go shortly thanks for your time!!

 

[cagliostro]

Hey guys thanks for your help! Problem is fixed now by resetting multiple flight modes and also playing with the switch on the remote a bit. Everything seems fine now, thanks again for your time and help! Follow me on insta @cherrypie190 and I’ll follow back[emoji12]