Welcome Mavic Pilot!
Jump in and join our free DJI Mavic community today!
Sign up

Best place for parts?

ufomg

Active Member
Joined
Jun 1, 2018
Messages
31
Reaction score
5
Age
47
I need to replace a PCB after a crash.
UK preferably but happy to buy from overseas if recommended.
OEM parts only please.
 
Last edited:

MiniPalourde

Well-Known Member
Joined
Jan 26, 2018
Messages
275
Reaction score
112
Age
54
Location
Canada or USA
Where are the best places online for spare/replacement parts?

I need to replace a PCB after a crash.
UK preferably but happy to buy from overseas if recommended.
OEM parts only please.
I don't know any shops that sell Mavic PCBs but @Thunderdrones might be able to sell you one.
 
  • Like
Reactions: Former Member

msinger

DJI Drone Expert
Approved Vendor
Premium Pilot
Joined
Oct 12, 2016
Messages
20,841
Reaction score
11,269
Location
Harrisburg, PA (US)

ufomg

Active Member
Joined
Jun 1, 2018
Messages
31
Reaction score
5
Age
47
Thanks for the replies...
I need a Main Board A with the associated bottom cover piece.
She fell about four stories onto rocks!
 

ufomg

Active Member
Joined
Jun 1, 2018
Messages
31
Reaction score
5
Age
47
oh theres lots broken but the pcbs seem to be the most problematic for buying :p

1.main ribbon cable
2.main board
3.bottom cover
4.multi core wire (silver) to gimble
5.vibration damper board / gimble mount (with the rubber bits)
 

Former Member

Well-Known Member
Joined
Dec 20, 2016
Messages
14,022
Reaction score
13,025
Location
Duluth, Georgia
oh theres lots broken but the pcbs seem to be the most problematic for buying :p

Pictures of all broken parts would be very helpful since you have to disassemble it anyway.


1.main ribbon cable There are 3 ribbon cables that go to the boards. 2 short, 1 long. Which one?
2.main board The board in your picture is called the core board. The main board is the FC board.
3.bottom cover AKA heat sink bottom cover
4.multi core wire (silver) to gimble Thats called the LVDS silver stranded video cable
5.vibration damper board / gimble mount (with the rubber bits) This usually comes as a set
 

ufomg

Active Member
Joined
Jun 1, 2018
Messages
31
Reaction score
5
Age
47
oh theres lots broken but the pcbs seem to be the most problematic for buying :p

Pictures of all broken parts would be very helpful since you have to disassemble it anyway.


1.main ribbon cable There are 3 ribbon cables that go to the boards. 2 short, 1 long. Which one?
2.main board The board in your picture is called the core board. The main board is the FC board.
3.bottom cover AKA heat sink bottom cover
4.multi core wire (silver) to gimble Thats called the LVDS silver stranded video cable
5.vibration damper board / gimble mount (with the rubber bits) This usually comes as a set
Wow thank you for the information!
Yes and that's just the bits that are visually damaged...oops
 

ufomg

Active Member
Joined
Jun 1, 2018
Messages
31
Reaction score
5
Age
47
my bad...hadnt realised how many ribbon cables i had.
 

Former Member

Well-Known Member
Joined
Dec 20, 2016
Messages
14,022
Reaction score
13,025
Location
Duluth, Georgia
By the way, you should inspect your fan and shroud for damage. Your bottom heat sink cover is dented right at the point that connects directly to the duct at the bottom of the fan shroud.
 

Former Member

Well-Known Member
Joined
Dec 20, 2016
Messages
14,022
Reaction score
13,025
Location
Duluth, Georgia
You will probably need to pull the whole fan assembly (4 screws) to replace the ribbon(s) that go to the gimbal, but if one is broken you have no choice.
 

ufomg

Active Member
Joined
Jun 1, 2018
Messages
31
Reaction score
5
Age
47
You will probably need to pull the whole fan assembly (4 screws) to replace the ribbon(s) that go to the gimbal, but if one is broken you have no choice.
You've been amazingly helpful.
What items did you stock and can you ship to the uk?
 
All E RC Mavic Drones

New Threads

Forum statistics

Threads
71,699
Messages
830,817
Members
98,739
Latest member
smalt0141