- Joined
- Feb 27, 2019
- Messages
- 36
- Reactions
- 24
After doing the most recent firmware update for the Mavic Air and the remote, I've been having a hard time with calibration. On several occasions, it won't let me fly. I move away from any suspected obstacle that might contain magnetic forces or metal. And I still get calibration failed. You can't fly. Sometimes, it suddenly goes to you can fly after 1 or 2 minutes. I never had this problem prior to the last firmware update. In research I heard that if you turn off the MA and the turn it back on it will let you calibrate (like a computer reset). I am flying in cold weather the temp is usually between 32 and 40 degrees f.