I've noticed a few software quirks in DJI GO 4 using Gesture Mode several times now, enough that I'd like to mention them here and see if others can verify them as well.
Gesture Mode:
1. When Gesture Mode is used and a few photos are taken using it.
Assuming a user had previously set photos to be captured in JPEG+RAW (DNG) in the GO app.
In Gesture Mode only JPEG photos are captured, no RAW (DNG) files are saved.
Futhermore, for the rest of the flight, even when in Normal (GPS) Mode, all photos taken
after Gesture Mode was used will also be saved only in JPEG, (not RAW files), even though
JPEG+RAW (DNG) is the current photo setting in the GO 4 app.
2. If the the red LED lights happen to be turned off, say by having the C1 or C2 button set to be an On/Off switch;
when Gesture Mode is used, the lights will not activate to give the user any feedback about when they have been tracked, recognized
and a snapshot is to be shortly taken. It seems that even if the red LEDs currently happen to be set to off, they should still turn on when Gesture Mode is used, thereby providing some feedback to the user about what the state of the Mavic is while in Gesture Mode.
Gesture Mode:
1. When Gesture Mode is used and a few photos are taken using it.
Assuming a user had previously set photos to be captured in JPEG+RAW (DNG) in the GO app.
In Gesture Mode only JPEG photos are captured, no RAW (DNG) files are saved.
Futhermore, for the rest of the flight, even when in Normal (GPS) Mode, all photos taken
after Gesture Mode was used will also be saved only in JPEG, (not RAW files), even though
JPEG+RAW (DNG) is the current photo setting in the GO 4 app.
2. If the the red LED lights happen to be turned off, say by having the C1 or C2 button set to be an On/Off switch;
when Gesture Mode is used, the lights will not activate to give the user any feedback about when they have been tracked, recognized
and a snapshot is to be shortly taken. It seems that even if the red LEDs currently happen to be set to off, they should still turn on when Gesture Mode is used, thereby providing some feedback to the user about what the state of the Mavic is while in Gesture Mode.
