DJI Goggles Racing Edition boot stucked

[MaddionMax]

Hi

I have a DJI Goggles RE, but it stucked on boot logo. Assistant not able to recognize, Windows also drop the connection.

Any ideal how can I fix/reflash it?

 

[Cafguy]

1. Make sure the cable is the right one
2. Reinstall the DJI assistant to the latest if you have that delete and reinstall
3. Did you select the correct port?
4. The connector inside the goggles needs to be repaired.

 

[MaddionMax]

1. Make sure the cable is the right one
2. Reinstall the DJI assistant to the latest if you have that delete and reinstall
3. Did you select the correct port?
4. The connector inside the goggles needs to be repaired.

1, Checked, working well.
2, Done, nothing changed.
3, Absolutely!!!
4, Which connector? The USB port working, the Goggles charging, but the software not booting. Stuck on the DJI logo screen.

I hope somebody can tell me a trick, how can reflash it.

 

[Cafguy]

I will ask someone else I have a pair of the RE editions never had them do that to me tho
DID you factory reset them!
If you are seeing only the DJI screen in the goggles I am told to turn them on and let them drain completely ( Hard Reset)

 

[MaddionMax]

I will ask someone else I have a pair of the RE editions never had them do that to me tho

Thanks! I also have two white Goggles, also never seen this.
Honestly, seems it can't boot or missing the software.

 

[Cafguy]

it could be a faulty connector they are bad in these goggles I would try the hard reset and start from scratch.
Hope it Works, let me Know.