dji mini1 battery doesnt work on mini2

[mavicmodx]

Hi, I recently bought a mini1 battery that I sent to be modified, the guy at a meeting did it and showed me that it worked for him. It doesn't want to work with me, in the dji mini2 charging hub , 2 lights are flashing, when I put it in the drone, the drone does not light up.

 

[Yorkshire_Pud]

My Mavic Mini batteries work perfectly in my Mini 2 and, from memory, in the Mini 2 hub. That is without modification. I would suspect there is something wrong with your battery.

 

[mavicmodx]

My mini batteries work perfectly in my mini 2 and, from memory, in the mini 2 hub. I would suspect there is something wrong with the battery.

i think it's bms problem, i can't connect it to cp2112 either...

 

[slup]

...a mini1 battery that I sent to be modified

Most probably due to this..?

 

[mavicmodx]

Most probably due to this..?

now the battery has 2x3000mah 18650.

 

[slup]

now the battery has 2x3000mah 18650.

So what you have isn't a Mini 1 battery anymore... you have a modded battery where many thing's can have gone wrong causing both the drone & the charger to not recognize it & thereby refuse to interact with it.

 

[mavicmodx]

So what you have isn't a Mini 1 battery anymore... you have a modded battery where many thing's can have gone wrong causing both the drone & the charger to not recognize it & thereby refuse to interact with it.

I see your point, but that's not it. even when i try to connect the bms to the computer using the cp2112 chip, it doesn't read the chip... is there a way to check if the chip is damaged?