Drone totally broken after firmware upgrade

[elpimps]

This is an old problem but only today i decided to investigate more into this issue.
Long time ago i upgraded my mini (1) to 0600 and suddently it stopped working.

When i turn it on and sync with my RC i just cannot move the camera up or down BUT if i get into manual gimbal setup, i can move the camera with the arrows.

I think that, for some reasons, 0600 is incompatible with my drone but for obvious reasons, now i cannot downgrade it to any previous versions.
Any help?

Edit: there is a "fake" method that is going around in the forum to downgrade the firmware
i debunked it here with all assistant 2 consumer versions: Mavic Mini 1, can't downgrade from 01.00.0600

 

[elpimps]

So i suppose there is no way to get back and fix it at this point...
Dunno if i'll buy a dji again

 

[MS Coast]

I don't recall ever hearing of an actual case of a firmware upgrade creating a problem like that. It's almost certain that there's another problem.

You might try re-installing the Fly app and refreshing the firmware. It's possible that the installation of the upgrade was corrupted.

Updating Your Drone Firmware

You can update the drone firmware through the DJI app or DJI Assistant 2. For the detailed steps, refer to this article.

support.dji.com

 

[elpimps]

I don't recall ever hearing of an actual case of a firmware upgrade creating a problem like that. It's almost certain that there's another problem.

You might try re-installing the Fly app and refreshing the firmware. It's possible that the installation of the upgrade was corrupted.

Updating Your Drone Firmware

You can update the drone firmware through the DJI app or DJI Assistant 2. For the detailed steps, refer to this article.

support.dji.com

I already tryed all possible solution from the web. The only thing i cannot do is to downgrade the firmware to a working one.
The drone stopped working just after the update.

 

[Felix le Chat]

I already tryed all possible solution from the web. The only thing i cannot do is to downgrade the firmware to a working one.
The drone stopped working just after the update.

iOS or Android device hosting the flight app? If android: use an older version of the FLY app and try connecting again.

 

[elpimps]

iOS or Android device hosting the flight app? If android: use an older version of the FLY app and try connecting again.

iOS