I didn't have time to wait for a custom made I-Pad holder and the other morning before going out I had this idea and it took me all of about 5 min to make.
Total cost??? had parts on the bench.... probably about 25cents worth of material.
2) 5/16" or 3/8" dowels about 10" long
3/4" self adhesive Velcro
2 pcs about 1.5" long - apply to swing down handles on transmitter (soft side of Velcro)
2 pcs about 3" long - apply to dowell (soft side of Velcro)
Apply other half of Velco as shown in photos. Loop Velcro on back of I-Pad[
Photos should be self explanatory. This will not slip and is a very solid mount.
Total cost??? had parts on the bench.... probably about 25cents worth of material.
2) 5/16" or 3/8" dowels about 10" long
3/4" self adhesive Velcro
2 pcs about 1.5" long - apply to swing down handles on transmitter (soft side of Velcro)
2 pcs about 3" long - apply to dowell (soft side of Velcro)
Apply other half of Velco as shown in photos. Loop Velcro on back of I-Pad[
Photos should be self explanatory. This will not slip and is a very solid mount.
Attachments
Last edited:
